Navigation: Reader Management > Physical Readers >

Physical Reader Profile (Add)

Still need help? Create a Support Ticket with Stratum Support

Send comments on this topic.

← Previous Next →

 

Add a Physical Reader Profile

The purpose of this action is create a Reader Profile from scratch, however it is always easier to COPY an existing profile of similar configuration as a starting point to avoid repetitive data entry and possibly missing key settings. 

 

Tag Reader ID

The Reader ID assigned by the end user. This could be a combination of the Model # + serial # or a way of describing where the reader will be deployed. It is up to each organization to build a standard nomenclature that is scalable.

 

Description

The Manufacturer assigned to the physical reader

 

Manufacturer

The applicable Manufacturer Model to the physical reader

 

Model

The applicable Manufacturer Model to the physical reader

 

Host IP Address

The IP address and port of the reader (only applicable for Network readers). Port setting for LLRP readers :5084, IF5 and XR400 remote mode= :2190 For server based mode IF5 value = :2189 and XR400 value = :3000

 

GPIO IP Address

The IP address and port of the Reader’s General Purpose Input/Output Port (only applicable for Network readers). This allows the Filtering and collection module to ‘listen’ for input (motion detectors) and write to output (signal lights). The port setting for the Stratum Global SmartBox is :502 Note: This is not supported natively by all readers.

 

Timeout

The duration of time that the Client application will wait to acquire the Reader module. Note: for IF5 readers this must be set above 5 seconds as that is how long it takes to acquire the internal serial connection to the reader module.

Read Event Cycle

The time specified that the reader will be attempting to read any tags present within the RF field of its attached antenna(s) - when instructed to do so by a Reader Schedule or Reader Interrogate feature. This is a combination of a user entered time period [numeric value] and selected period type [msec, sec, min, readcycle]. Example combinations would be 400 milliseconds, 5 seconds, 2 minutes or 2 readcycles. Note: TagNet does not have absolute control of the read cycle as some readers take longer than others to perform a read cycle. A smaller value such as 250ms may be shorter than the reader’s first response. In this case the read cycle is terminated as soon as the actual time is GE to the desired value. This property is used for both Server based and Smart Readers.  Also note that any binding logic is executed after the read event cycle.

 

Status

The current status of the Reader profile (Active or Inactive).

 

Update Changes

Commits any changes made to Reader attributes and returns to the main Reader list

 

Cancel Changes

Cancels any changes made and returns to the main Reader list

 

 


Copyright © 2024 Stratum Global, Inc.