Product Example

Product Commissioning & Mapping Example

Shown below is an example of mapping multiple tags with a product number at the same time using tags that are already serialized with unique EPC's. It is import to note that using the [Commissioning/Map] option is not practical here as all the tags would be issued the same EPC thus defeating the operation of serialized tags. Also note that the Container field could be populated here if all the product tags relate to a common identifier (e.g. Pallet ID, Bin, Batch, etc.).

After Read & Before Mapping Update

	Tag Reader ID
	A dropdown of all Physical Reader defined in the Reader Management module

	Container
	This is a logical grouping number that can define such things as Pallet ID, Container ID, Serialization, document ID, Case or box number, etc.

	Item Number
	Enter the Item Number to be mapped. Using the [Search] button will enable a search of Item numbers, allowing a selected Item to be pulled back into this input field

	Read
	Reads any tags in the antenna field of the chosen Reader and displays them in list. This step is highly recommended in knowing exactly what tags could be potentially written to/processed.

	Map Only
	Reads any tags in the antenna field of the chosen Reader, and associates those tags with the entered Item ID (and Container if populated)

	Unmapped Tag
	Indicates an occurrence of an unmapped tag in the read zone that will be processed

	UnMapped Counter
	Adds up the number of Unmapped tags in read zone.

After Update

Shown below is the results after processing the tags using the [Map Only] button from above. Note: even though only one entry is shown in the list there are actually (3) tags that were mapped. However, because they all share the same EPC, they show up as a single occurrence.

	Mapped Counter
	Indicates the Tags were successfully Mapped

	Mapped Counter
	The resulting attributes of the Mapped Tag